Try HP : HP0-Y37 practice torrent pass for sure

HP HP0-Y37 Exam Overview:

HP HP0-Y37 Exam Syllabus Topics:

HP Migrating &Troubleshooting Enterprise Networks Sample Questions:

Question 1

A company's Cisco network runs VTP. VTP is set in Server mode on distribution switches and in Client mode on edge switches. To prepare for the insertion of HP switches at the edge of the company's network, what should you do?

A. Change VTP mode to Transparent on all Cisco switches.
B. Set GVRP on all Cisco switches.
C. Remove VTP on all Cisco switches and reconfigure all static VLANs on all switches.
D. Configure Cisco switches in VTP Server mode and HP switches in GVRP.

Question 2

The Cisco network of a company has the following characteristics:

What happens within the network? (Select three.)

A. There is a disruption to network connectivity because EIGRP metrics and OSPF are very different and cannot produce the same path selection.
B. There is a temporary disruption as the routers transitioning to OSPF routes calculate paths that work in this hybrid environment.
C. On routers on which the EIGRP distance is 220, OSPF networks replace EIGRP networks in the IP routing table.
D. There is no disruption to network connectivity, although some routers using OSPF routes and some are using EIGRP routes because the network paths are the same.
E. On routers on which the EIGRP distance is still at default values, only EIGRP networks are still visible in the IP routing table.
F. On routers on which the EIGRP distance is 220, OSPF redistributed networks are not visible in the IP routing table.
G. On routers on which the EIGRP distance is still at default values, only OSPF networks are visible in the IP routing table.

Question 3

Click the Exhibit button.

Which combination of BGP attributes will be chosen as the best path for prefix 19.0.0.0/8?

A. eBGP, MED 6000
B. iBGP, MED 4000
C. iBGP, MED 3000
D. eBGP, MED 5000

Question 4

Click the Exhibit button.

Which statement is true?

A. The state of Ring 3 is complete.
B. There is no Master in Ring 3.
C. The state of Ring 3 is fail.
D. The Ring State is unknown on a transit switch.
E. Ring 3 is misconfigured on Switch 7.
F. The state of Ring 3 is incomplete.

Question 5

Click the Exhibit button.

A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The following are address blocks chosen by the customers for each site as shown in the chart:

The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the MPLS LSR-ID. Customer A uses a default route on each site. Customer B uses eBGP to exchange routes with the provider. All MPLS layer-3 VPNs are functioning properly. Which configuration change will cause Customer-A Site 1 to lose access to Customer-A Site 2?

A. [P-10]
ip route static 10.1.0.0 16 null 0 preference 9
B. [PE-1]
bgp 1
undo import-route static
C. [P-10]
ospf 1
area 0
abr-summary 16.0.0.2 30 cost 1000
D. [PE-3]
bgp 1
undo peer 16.0.0.1 reflect-client
E. [PE-1]
int vlan 100
undo mpls ldp

Solutions: