HPE Network Campus Access Professional Architect Sample Questions:

1. Which member types require a reboot when doing an In-Service-Software-Upgrade within a VSF stack?

A) Member
B) Standby
C) all member types
D) Conductor

2. A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100,000 sq ft (9290 sq m). Data centers are all offsite and will be out of scope for this project. The customer is underserved by its existing L2- based network infrastructure and would like to take advantage of modem best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of 'smart office' technology. These improvements will drive blue-dot wayfinding, presence analytics, and other location-based services.
The client would like to ensure full wireless coverage in its 40 m x 40 m (130 ft x 130 ft) auditorium during company functions while maintaining the fewest APs for aesthetic purposes.
Wi-Fi6 APs are a minimum requirement.
Which AP series would you use in the auditorium's 1,000 seats with a maximum take rate of
80%?

A) AP577
B) AP555
C) AP635
D) AP515

3. An insurance company is planning to modernize its current Wi-Fi 4 deployment in its downtown office building. At the time, network was designed around a 2.4 GHz radio coverage strategy.
They are targeting a high-throughput, high-density (HD) design to future-proof its investment.
Your team is proposing a new site survey aligned with modern wireless design principles.
The CTO believes the site is prepared for Wi-Fi 6E standard or newer, referencing a previous site survey conducted four years ago. This same site survey confirmed the reuse of current cabling and existing access point installation locations.
Which statement about a 6 GHz design is correct?

A) Since Wi-Fi 4 and Wi-Fi 6E support the 5 GHz band, a site survey would confirm a one to one AP replacement in the same locations.
B) A site survey could prove the 6 GHz radios can increase signal strength without concerns of interference with non 802.11 technologies.
C) With limited 6 GHz client support today, a new site survey should be done to focus on 5 GHz for compatibility.
D) The 6 GHz band has a noticeable higher Free-space path loss (FSPL) than 2 4 GHz band.

4. Hotspot Question
Mark the layer where Dynamic Multicast Optimization should be activated.

5. ACME retail has 38 locations spread out across five US states and two provinces in Canada.
They are looking to grow 20% over the next two years. They have an HQ with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 sq m) and the Canadian warehouse is 130K sq ft (12100 sq m). The forklifts on the loading docks are equipped with a wireless tablet on board.
A typical store is reportedly about 60,000 sq ft (5575 sq m) and smaller stores are planned at
25,000 sq ft (2320 sq m). The locations need to expand the abilities to vendors that need to add setup displays or interactive kiosks in the stores. The current infrastructure was installed in 2015 and used wireless N technology in a coverage model. The wiring is Cat5, and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current PBX system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would be to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in half.
The office has an MDF and two IDFs located on floors one and two. The MDF is in the basement, and you have multiple WAN circuits for the HQ links. Each store has a local handoff from the cable company (ethernet) in the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
What should the architect be concerned about regarding the solution? (Choose two.)

A) Active Directory
B) multiple locations
C) IP addresses
D) Regulatory Domains

Solutions: