JN0-663 Dumps 2021 - New Juniper JN0-663 Exam Questions
Free JN0-663 braindumps download (JN0-663 exam dumps Free Updated)
How to Prepare for Service Provider Routing and Switching, Professional JN0-663 Exam
Preparation Guide for Service Provider Routing and Switching, Professional JN0-663 Exam
Introduction
Juniper Networks, Inc. is an American multinational company based in Sunnyvale, California. The business designs and markets networking products, including routers, switches, network management tools, network security products, and software-defined networking technologies.
Juniper Networks initially concentrated on core routers used by Internet Service Providers (ISPs) to conduct IP address searches and guide internet traffic. By purchasing Unisphere, the firm joined the market in 2002 for edge routers used by ISPs to redirect Internet traffic to individual users. In 2003, Juniper joined the IT defense business with its JProtect security toolkit before purchasing NetScreen Technologies security company the following year. Juniper joined the enterprise market in the early 2000s, accounting for one-third of its sales by 2005. As of 2014, Juniper concentrated on designing innovative software-defined networking devices.
Many applicants involved in Service Provider Routing and Switching, Technical (JNCIP-SP) qualification may be familiar with the JN0-662 test. However, the JN0-662 Lifetime Exam (EOL) concluded on June 21, 2020. You need to take the JN0-663 Juniper certification exam now to complete the Service Provider Routing and Switching, Technical (JNCIP-SP) certification exam. Juniper JNCIP â SP Certification is the technical standard of Juniper Service Provider Routing and Switching Certification Track. The Juniper Networks Certification Program (JNCP) Service Provider Routing and Switching Track helps members to show competence in Juniper Networks technologies. Successful candidates show comprehensive knowledge of networking technologies in general and the Juniper Networks service provider routing and switching platforms. This credential protocol allows applicants to pass four tests, including the Associate Exam (JN0-103), the Expert Exam (JN0-362), and the Technical Exam (JN0-663).
In this guide, we will cover the Juniper JNO-663 practice exams, certified professionals salary, and all aspects of the Service Provider Routing and Switching, Professional certification
Who should take the Service Provider Routing and Switching, Professional JN0-663 Exam
The Juniper Service Provider Routing and Switching, Professional JN0-663 Exam is an internationally recognized validation that identifies persons who earn it as possessing skilled in Juniper Service Provider Routing and Switching, Professional Certification. If candidates want significant improvement in career growth need enhanced knowledge, skills, and talents. The Juniper Service Provider Routing and Switching, Professional JN0-663 exam provides proof of this advanced knowledge and skill. If a candidate knows associated technologies and skills that are required to pass the Juniper Service Provider Routing and Switching, Professional JN0-663 practice test then he should take this exam.
NEW QUESTION 29
Exhibit:
Traffic is being sent from R2 to R3. The link between R2 and R3 fails.
Referring to the exhibit, which statement is correct?
- A. Manual intervention is required for traffic to be rerouted.
- B. Traffic will automatically reroute using R2 to R4 to R1 to R3.
- C. Traffic will automatically reroute using the shortest path, which is R2 to R1 to R3.
- D. Traffic will automatically reroute distributed between all available paths.
Answer: B
NEW QUESTION 30
You have a mixed vendor EVPN environment and you need to ensure VXLAN interoperability between all devices.
In tins scenario, winch statement is correct?
- A. You should only use Type 2 and Type 5 routes.
- B. You should only use pure Type 5 routes.
- C. You should only use Type 6 and Type 2 routes.
- D. You should only use pure Type 2 routes.
Answer: A
NEW QUESTION 31
Exhibit:
A Layer 3 VPN exists in the provider network and the CE devices are connecting to the PE devices using BGP. The PE devices are receiving BGP routes from the CE devices and the PE devices have the CE BGP routes in their respective routing tables. However, the remote CE devices are not receiving the BGP routes.
Referring to the exhibit, what is the problem?
- A. A VRF target community mismatch exists.
- B. The PE devices are detecting an AS loop.
- C. A route distinguisher mismatch exists.
- D. The CE devices are detecting an AS loop
Answer: D
NEW QUESTION 32
Exhibit:
R2 is receiving a route from R1 and you must ensure that the route is not advertised to R3.
Referring to the exhibit, which two configurations on R2 will solve the issue? (Choose two.)
- A. Apply the no-export policy as an import policy under group 65001
- B. Apply the no-export policy as an export policy under group 65003
- C. Apply the no-advertise policy as an export policy under group 65003
- D. Apply the no-advertise policy as an import policy under group G5001
Answer: C,D
NEW QUESTION 33
Which two statements about IS-IS are correct? (Choose two.)
- A. Level 2 routers can form adjacencies with either Level 1 or Level 2 routers.
- B. A Level 1 router can only form adjacencies with other Level 1 routers.
- C. Level 1 intermediate systems exchange routing information with Level 1 intermediate systems in other IS-IS areas.
- D. An IS-IS router sets the attached bit in the PDUs it sends to a Level 1 area to indicate that it is a backbone router.
Answer: A,B
NEW QUESTION 34
Exhibit.
Two CE devices (CE-1 and CE-2) belong to the same customer and connect into a single PE device (PE-1) However, the CE devices cannot communicate with each other You want to allow the CE devices to communicate with each other Referring to the exhibit, which action would solve the problem?
- A. Configure both routing instances with the set routing-options autonomous-system loops 3 statement
- B. Configure both routing instances with the set routing-opt ions auto-export-statement
- C. Configure both routing instances with the as-override statement within the BGP protocol
- D. Configure both routing instances with the vrf-table-label statement
Answer: B
NEW QUESTION 35
Exhibit:
Referring to the exhibit, which two statements about route reflectors are correct? (Choose two.)
- A. RR2 adds its cluster ID when advertising routes from CHent4 to Client3.
- B. RR1 advertises routes learned from Client1to RR2 with itself as the next hop.
- C. RR2 advertises routes learned from Client3 to EBGP2 with itself as the next hop.
- D. RR1 and RR2 need the same cluster ID to exchange routes learned from their clients.
Answer: A,C
NEW QUESTION 36
Exhibit:
A network administrator is concerned about the number of LSAs that they are observing on the network.
What will reduce Type 7 LSAs advertised from R2 to the non-backbone routers shown in the exhibit?
- A. Configure no-summaries under area 0.0.0.2 on R2.
- B. Configure no-naaa-abr under protocols ospf3 on R2.
- C. Configure no-summaries under protocols ospf3 on R2.
- D. Configure nssa under area 0.0.0.2 on R2.
Answer: B
NEW QUESTION 37
Exhibit:
You must configure an OSPF virtual link to facilitate communication between Area 0 and Area 20.
Referring to the exhibit, which two addresses should you use as the neighbor IDs of the virtual link endpoints?
(Choose two.)
- A. The address that is associated with R4's router ID.
- B. The address that is associated with R2's xe-1/2/0 interface.
- C. The address that is associated with R2's router ID.
- D. The address that is associated with R4's xe-0/0/1 interface.
Answer: A,C
NEW QUESTION 38
Exhibit:
R4 is directly connected to both RPs (R2 and R3). R4 is currently sending all joins upstream to R3 but you want to load balance the joins between both RPs Referring to the exhibit, which configuration change will solve this issue?
- A. Configure the group-range parameter to be the same on R2 and RCA
- B. Configure the join-load-balance parameter under PIM on R4.
- C. Configure the default route in inet.2 on R4 from R3 as the next hop to both R3 and R2.
- D. Configure the bootstrap priority on R2 to be the same as R3.
Answer: B
NEW QUESTION 39
Exhibit:
The route shown in the exhibit is an example of which type of next-generation MVPN route?
- A. Type 3 Selective MVPN autodiscovery route
- B. Type 1 Intra-AS inclusive MVPN membership discovery
- C. Type 2 Inter-AS inclusive MVPN membership discovery
- D. Type 4 Selective MVPN autodiscovery route for leaf
Answer: B
NEW QUESTION 40 
You are receiving the same 200.0.0.0/24 BGP route from four different ISPs.
Referring to the exhibit, which ISP's route would be selected as active?
- A. ISP-B
- B. ISP-C
- C. ISP-D
- D. ISP-A
Answer: C
NEW QUESTION 41
You are responsible for configuring CoS for your network Your network includes a video application with strict latency requirements, so that any packets delayed by more than 75 ms are effectively useless. You want to ensure that you do not waste buffer space.
When configuring the scheduler for this application, which feature would you use?
- A. exact
- B. rate limit
- C. remainder
- D. temporal
Answer: D
NEW QUESTION 42
Exhibit:
Referring to the exhibit, you are asked to summarize all routes in the 10.10.0 0/22 address range ensuring that a single summary route is present in area 49.0002 while the IS-IS internal contributing routes are restricted to area 49.0001. All other routes must not be affected.
Which two operations would have to be performed on R2 to accomplish this task? (Choose two.)
- A. Include the to level 2 match criteria when referencing the summary route.
- B. Create and apply a policy with a single term to accept only the summary route.
- C. Include the from level 1 match criteria when referencing the summary route.
- D. Create and apply a policy with two terms; one to accept the summary route and one to reject the contributing routes.
Answer: A,D
NEW QUESTION 43 
You have the Layer 2 VPN configuration shown in the exhibit. You are asked to determine the remote site ID for ge-1/0/1.512.
In this scenario, what is the remote site ID?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 44
You must deploy an interprovider VPN option that ensures that the ASBRs do not need to store any VPN routes.
In this scenario, which interprovider VPN option should you choose?
- A. option A
- B. option C
- C. option B
- D. option D
Answer: B
NEW QUESTION 45
Exhibit:
You have the Layer 2 VPN configuration shown in the exhibit. You are asked to determine the remote site ID for ge-1/0/1.512.
In this scenario, what is the remote site ID?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 46
Exhibit:
Referring to the exhibit, you have recently established a Layer 3 VPN between PE-1 and PE-2, connecting the two CE sites. Rowing information is being shared between sites and the customer has two-way communication After adding this VPN to your core network, PE-1 and PE-2 are no longer able to forward traffic to the Internet.
In this scenario, what is the problem?
- A. You must configure the inet-vpn NLRI for the BGP sessions on both your PE devices.
- B. You must configure the inet unicast NLRI for the BGP session on both your PE devices.
- C. You must configure a separate internal BGP group on both your PE devices specifically for Internet connectivity.
- D. You must configure a multihop external BGP session between your PE devices and the Internet provider's ISP-A device.
Answer: B
NEW QUESTION 47
Exhibit:
A network administrator is migrating from IPv4 to IPv6 and one of the IS-IS adjacencies is not coming up between R1 and R2.
Which action will solve the problem?
- A. Remove topologies ipv6-unicast from protocols isis on R1.
- B. Configure topologies ipv4-unicast from protocols isis on R2.
- C. Remove topologies ipv6-unicast from protocols isis on R2.
- D. Configure an IPv4 address on interface ge-0/0/1 on R1.
Answer: D
NEW QUESTION 48
......
How much Service Provider Routing and Switching, Professional JN0-663 Exam Cost
The price of the JN0-663 exam is $200 USD. for more information related to the Service Provider Routing and Switching, Professional JN0-663 exam, please visit Juniper Website, as the prices changes based on different currencies.
Verified JN0-663 dumps Q&As - Pass Guarantee Exam Dumps Test Engine: https://www.suretorrent.com/JN0-663-exam-guide-torrent.html
JN0-663 Dumps for Pass Guaranteed - Pass JN0-663 Exam: https://drive.google.com/open?id=1QAedVAp4sOa09OEVdNY6tZhOvQaLpaqe