[May 17, 2024] HPE7-A01 Exam Dumps - Try Best HPE7-A01 Exam Questions - SureTorrent
Verified HPE7-A01 exam dumps Q&As with Correct 121 Questions and Answers
HPE7-A01 exam is an industry-recognized certification that demonstrates a professional's expertise in Aruba access solutions. It is designed for network engineers, administrators, and consultants who are responsible for designing, deploying, and managing enterprise-level wireless networks. Aruba Certified Campus Access Professional Exam certification validates the candidate's ability to configure and troubleshoot Aruba wireless networks, as well as their understanding of the latest industry standards and best practices. Earning the Aruba Certified Campus Access Professional certification can enhance an IT professional's career prospects and provide them with the knowledge and skills necessary to succeed in today's fast-paced IT environment.
NEW QUESTION # 19
You are deploying Aruba CX 6300's with the customers requirement to only allow one (1) VoIP phone and one (1) device.
The following local role gets assigned to the phone
port-access rote VoIP device-traffic-class voice
What set of commands best fits this requirement?
- A. interface 1/1/1
aaa authentication port-access client-limit 2
aaa authentication port-access auth-mode client-mode - B. interface 1/1/1
aaa authentication port-access client-limit 1
aaa authentication port-access auth-mode device-mode - C. interface 1/1/1
aaa authentication port-access client-limit multi-domain 2 aaa authentication port-access auth-mode multi-domain - D. interface 1/1/1
aaa authentication port-access auth-mode multi-domain
Answer: C
Explanation:
Aruba CX 6300 switches support various features to control the port access for different types of devices, such as client mode, device mode, and multidomain mode. These features can help limit the number of clients that can connect to a port and prevent unauthorized devices from accessing the network.
This is because option C shows how to configure the client limit and the auth-mode for a specific port using the interface command and the aaa authentication port-access command. The client limit specifies the maximum number of clients that can connect to a port. The auth-mode specifies the authentication mode for the port. In this case, option C sets both parameters to multi-domain mode, which allows only one voice device and one data device to be authenticated on a port
https://www.arubanetworks.com/techdocs/AOS-CX/10.10/HTML/monitoring_6300-6400/Content/Chp_LEDs/fro-pan-led-630.htm 2: https://www.arubanetworks.com/products/switches/6300-series/ 3: https://www.arubanetworks.com/techdocs/AOS-CX/10.11/HTML/security_6200-6300-6400/Content/Chp_Port_acc/Port_acc_gen_cmds/aaa-aut-por-acc-aut-mod-fl-109.htm
NEW QUESTION # 20
Refer to the image.
Your customer is complaining of weak Wi-Fi coverage in their office. They mention that the office on the other side of the hall has much better signal What is the likely cause of this issue7
- A. The AP is using a directional antenna.
- B. The AP is configured in Mesh mode
- C. The AP is a remote access point.
- D. The AP is an outdoor access point.
Answer: A
Explanation:
Explanation
The likely cause of the issue of weak Wi-Fi coverage in the office is that the AP is using a directional antenna.
A directional antenna is an antenna that radiates or receives radio waves more strongly in one or more directions, creating a focused beam of signal. A directional antenna can provide better coverage and performance for a specific area, but it can also create dead zones or weak spots for other areas. The other options are incorrect because they either do not affect the Wi-Fi coverage or do not match the scenario.
References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/rf-fundam
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/antennas.
NEW QUESTION # 21
How is Multicast Transmission Optimization implemented in an HPE Aruba wireless network?
- A. The optimal rate for sending multicast frames is based on the lowest unicast rate across all associated clients.
- B. "The optimal rate for sending multicast frames is based on the highest broadcast rate across all associated clients
- C. When this option is enabled the minimum default rate for multicast traffic is set to 12 Mbps for 5 GHz
- D. The optimal rate for sending multicast frames is based on the lowest broadcast rate across all associated clients.
Answer: A
Explanation:
Explanation
multicast transmission optimization is a feature that allows the IAP to select the optimal rate for sending broadcast and multicast frames based on the lowest of unicast rates across all associated clients1. When this option is enabled, multicast traffic can be sent at up to 24 Mbps. The default rate for sending frames for 2.4 GHz is 1 Mbps and 5.0 GHz is 6 Mbps. This option is disabled by default1.
NEW QUESTION # 22
Which statement best describes QoS?
- A. Identifying the quality of the connection
- B. Determining which traffic passes specified quality metrics
- C. Identifying specific traffic for special treatment
- D. Scoring traffic based on the quality of the contents
Answer: C
Explanation:
Explanation
QoS stands for Quality of Service and is a mechanism that allows network devices to prioritize and differentiate traffic based on certain criteria, such as application type, source, destination, etc3. QoS involves identifying specific traffic for special treatment and applying policies and actions to improve its performance or meet certain service level agreements (SLAs)3. QoS can help network devices to manage congestion, delay, jitter, packet loss, bandwidth allocation, etc., for different types of traffic3. QoS can be implemented at various layers of the network stack and across different network domains. References: 3
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/qos/configuration/15-mt/qos-15-mt-book/qos-overview.html
NEW QUESTION # 23
You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and Aps, while template configuration for switches. You need to align with Aruba best practices.
Which set of actions will satisfy these requirements?
- A. Create a single group in Central. Create a unique site for each location, and assign devices to the appropriate site.
- B. Create one group in Central for switches a second group for APs. and a third group for gateways Create a unique site for each location, and assign devices to the appropriate site.
- C. Create a single group in Central. Create a unique site for each type of device, and assign devices to the appropriate site.
- D. Create one group in Central for switches and a second group for APs and gateways. Create a unique site for each location, and assign devices to the appropriate site.
Answer: A
Explanation:
Explanation
This is because option C shows how to create a single group in Central with different configuration methods defined for each device type. For example, you can create a group with the name Group1, and within this group, you can enable template-based configuration method for switches and UI-based configuration method for Instant APs and Gateways. Aruba Central identifies both these groups under a single name (Group1). If a device type in the group is marked for template-based configuration method, the group name is prefixed with TG (TG Group1). You can use Group1 as the group ID for workflows such as user management, monitoring, reports, and audit trail2.
https://www.arubanetworks.com/techdocs/central/latest/content/nms/groups/abt-groups.htm 2:
https://www.arubanetworks.com/techdocs/central/latest/content/nms/groups/groups.htm
NEW QUESTION # 24
A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP-group settings.
After receiving Access-Accept from the RADIUS server, the Aruba Gateway will send Access-Accept to the AP through which tunnel?
- A. GRE tunnel
- B. IPsec tunnel
- C. PAR tunnel
- D. Split tunnel
Answer: A
Explanation:
Explanation
According to the Aruba Documentation Portal1, 802.1X is a standard for port-based network access control that uses a RADIUS server to authenticate and authorize wireless clients. 802.1X can be configured in different modes, such as bridge mode, tunnel mode, or split tunnel mode.
Option C: GRE tunnel
This is because option C shows how to configure an SSID in tunnel mode with the default AP-group settings on an Aruba switch. In tunnel mode, all client traffic from the access points is tunneled back to the controller and the controller would in turn put the client traffic onto the network2. The GRE protocol is used to encapsulate and decapsulate the traffic between the access points and the controller3.
Therefore, option C is correct.
1:
https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7696/GUID-581D2976-694B-46C7-849
https://community.arubanetworks.com/discussion/bridge-and-tunnel-mode 3:
https://www.twingate.com/blog/ipsec-tunnel-mode
NEW QUESTION # 25
Select the Aruba stacking technology matching each option (Options may be used more than once or not at all.)
Answer:
Explanation:
Explanation
a) Support up to 10 devices per stack -> VSF
b) Support two devices per stack -> VSX
c) Individual ISL links up to 400G are supported -> VSX
d) individual ISL links up to 50G are supported -> VSF
e) A maximum aggregate ISL bandwidth of 200G is supported -> VSF
References: 1
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/GUID-2E425DAE-EC54-4313-9D
NEW QUESTION # 26
Refer to Exhibit:
A company has deployed 200 AP-635 access points. To take advantage of the 6 GHz band, the administrator has attempted to configure a new WPA3-OWE SSID in Central but is not working as expected.
What would be the correct action to fix the issue?
- A. Change the SSID to WPA3-Enterprise (CNSA).
- B. Change the SSID to WPA3-Enhanced Open.
- C. Change the SSID to WPA3-Personal.
- D. Change the SSID to WPA3-Enterprise (CCM).
Answer: B
Explanation:
Explanation
The correct action to fix the issue is C. Change the SSID to WPA3-Enhanced Open.
WPA3-OWE is not a valid SSID type in Central. OWE stands for Opportunistic Wireless Encryption, and it is a feature that provides encryption for open networks without requiring authentication. OWE is also known as Enhanced Open, and it is one of the options for WPA3 SSIDs in Central1.
According to the Aruba document Configuring WLAN Settings for an SSID Profile, one of the steps to configure a WPA3 SSID is:
Select the Security Level from the drop-down list. The following options are available:
WPA3-Personal: This option uses Simultaneous Authentication of Equals (SAE) to provide stronger password-based authentication and key exchange than WPA2-Personal.
WPA3-Enterprise: This option uses 192-bit cryptographic strength for authentication and encryption, as defined by the Commercial National Security Algorithm (CNSA) suite.
WPA3-Enterprise (CCM): This option uses 128-bit cryptographic strength for authentication and encryption, as defined by the Counter with CBC-MAC (CCM) mode.
WPA3-Enhanced Open: This option uses Opportunistic Wireless Encryption (OWE) to provide encryption for open networks without requiring authentication.
The other options are incorrect because:
A: WPA3-Enterprise (CNSA) is a valid SSID type, but it requires 802.1X authentication with a RADIUS server, which may not be suitable for the company's use case.
B: WPA3-Personal is a valid SSID type, but it requires a passphrase to join the network, which may not be suitable for the company's use case.
D: WPA3-Enterprise (CCM) is a valid SSID type, but it requires 802.1X authentication with a RADIUS server, which may not be suitable for the company's use case.
NEW QUESTION # 27
A customer is using stacked Aruba CX 6200 and CX 6300 switches for access and a VSX pair of Aruba CX 8325 as a collapsed core 802 1X is implemented for authentication. Due to the lack of cabling, some unmanaged switches are still in use Sometimes devices behind these switches cause network outages The switch should send a warning to the helpdesk when the problem occurs You have been asked to implement an effective solution to the problem What is the solution for this?
- A. Configure spanning tree on the Aruba CX 8325 switches Set the trap-option
- B. Configure spanning tree on the Aruba CX 6200 and CX 6300 switches No trap option is needed
- C. Configure loop protection on all edge ports of the Aruba CX 6200 and CX 6300 switches Set up the trap-option
- D. Configure loop protection on all edge ports of the Aruba CX 6200 and CX 6300 switches No trap option is needed
Answer: C
Explanation:
This is the correct solution to the problem of devices behind unmanaged switches causing network outages due to loops. Loop protection is a feature that allows an Aruba CX switch to detect and prevent loops by sending loop protection packets on each port, LAG, or VLAN on which loop protection is enabled. If a loop protection packet is received by the same switch that sent it, it indicates a loop exists and an action is taken based on the configuration. Loop protection should be configured on all edge ports of the Aruba CX 6200 and CX 6300 switches, which are the ports that connect to end devices or unmanaged switches. The trap-option should be set up to send a warning to the helpdesk when a loop is detected. The other options are incorrect because they either do not configure loop protection or do not set up the trap-option. Reference: https://www.arubanetworks.com/techdocs/AOS-CX/10.05/HTML/5200-7540/GUID-99A8B276-0DA3-4458-AFD8-42BFEC29D4F5.html https://www.arubanetworks.com/techdocs/AOS-CX/10.05/HTML/5200-7540/GUID-D8613BDE-CD21-4B83-8561-17DB0311ED8F.html
NEW QUESTION # 28
Select the Aruba stacking technology matching each option (Options may be used more than once or not at all.)
Answer:
Explanation:
NEW QUESTION # 29
Which statements are true regarding a VXLAN implementation on Aruba Switches? (Select two.)
- A. They are only available for datacenter switches (CX 8k, 9k,10k)
- B. All Aruba CX switches support VXLAN.
- C. MTU size must be increased beyond the default
- D. VTEPs encapsulate and decapsulate VXLAN traffic
- E. VNIs encapsulate and decapsulate VXLAN traffic
Answer: C,E
Explanation:
Explanation
Option A: MTU size must be increased beyond the default
This is because option A shows how to configure the MTU size for VXLAN tunnels on Aruba switches using the interface command and the vxlan command. The MTU size must be increased beyond the default value of
1500 bytes to accommodate the VXLAN header and payload2.
Therefore, option A is true regarding a VXLAN implementation on Aruba switches.
Option B: VNIs encapsulate and decapsulate VXLAN traffic
This is also true regarding a VXLAN implementation on Aruba switches. VNIs are used to encapsulate and decapsulate VXLAN traffic between two devices, such as a switch and a server. VNIs are also used to map VXLAN tunnels to overlay networks3.
Therefore, option B is also true regarding a VXLAN implementation on Aruba switches.
VXLAN is a Layer 2 encapsulation technology that substitutes the usage of VLAN numbers to label Ethernet broadcast domains with VXLAN numbers. VXLAN supports 224 Ethernet broadcast domains or VXLAN numbers. A VXLAN number ID is referred to as VNI. There is a one-to-one relationship between an Ethernet broadcast domain and a VNI. A single Ethernet broadcast domain can't have more than one VNI.
NEW QUESTION # 30
When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?
- A. MAC tables
- B. UDLD
- C. RPVST+
- D. QSVI
Answer: A
Explanation:
Explanation
The information that the Inter-Switch Link Protocol configuration uses in the configuration created is B. MAC tables.
The Inter-Switch Link Protocol (ISL) is a protocol that enables the synchronization of data and state information between two VSX peer switches. The ISL uses a version control mechanism and provides backward compatibility regarding VSX synchronization capabilities. The ISL can span long distances (transceiver dependent) and supports different speeds, such as 10G, 25G, 40G, or 100G1.
One of the data components that the ISL synchronizes is the MAC table, which is a database that stores the MAC addresses of the devices connected to the switch and the corresponding ports or VLANs. The ISL ensures that both VSX peers have the same MAC table entries and can forward traffic to the correct destination2. The ISL also synchronizes other data components, such as ARP table, LACP states for VSX LAGs, and MSTP states2.
NEW QUESTION # 31
Refer to Exhibit:
With Access-1, What needs to be identically configured With MSTP to load-balance VLANS?
- A. Spanning-tree bpdu-guard setting
- B. Spanning-tree instance vlan mapppjng
- C. spanning-tree Cist mapping
- D. Spanning-tree root-guard setting
Answer: B
Explanation:
Explanation
The correct answer is B. Spanning-tree instance VLAN mapping.
To load-balance VLANs with MSTP, you need to configure the same VLAN-to-instance mapping on all switches in the same MST region. This means that you need to assign different VLANs to different MST instances, and then adjust the spanning tree parameters (such as priority, cost, or port role) for each instance to achieve the desired load balancing. For example, you can make one switch the root for instance 1 and another switch the root for instance 2, and then map half of the VLANs to instance 1 and the other half to instance 2.
According to the Cisco document Understand the Multiple Spanning Tree Protocol (802.1s), one of the steps to configure MST is:
* Split your set of VLANs into more instances and configure different MST settings for each of these instances. In order to easily achieve this, elect Bridge D1 to be the root for VLANs 501 through 1000, and Bridge D2 to be the root for VLANs 1 through 500. These statements are true for this configuration:
Switch D1(config)#spanning-tree mst configuration
Switch D1(config-mst)#instance 1 vlan 501-1000
Switch D1(config-mst)#exit
Switch D1(config)#spanning-tree mst 1 priority 0
Switch D2(config)#spanning-tree mst configuration
Switch D2(config-mst)#instance 2 vlan 1-500
Switch D2(config-mst)#exit
Switch D2(config)#spanning-tree mst 2 priority 0
The above commands create two MST instances, 1 and 2, and map VLANs 501-1000 to instance 1 and VLANs 1-500 to instance 2. Then, they make switch D1 the root for instance 1 and switch D2 the root for instance 2.
The other options are incorrect because:
* A. Spanning-tree bpdu-guard setting is a security feature that disables a port if it receives a BPDU from an unauthorized device. It does not affect load balancing with MSTP.
* C. Spanning-tree CIST mapping is not a valid command. CIST stands for Common and Internal Spanning Tree, which is the spanning tree instance that runs within an MST region and interacts with other regions or non-MST switches.
* D. Spanning-tree root-guard setting is another security feature that prevents a port from becoming a root port if it receives superior BPDUs from another switch. It does not affect load balancing with MSTP.
NEW QUESTION # 32
What is enabled by LLDP-MED? (Select two.)
- A. APs can request power as needed from PoE-enabled switch ports
- B. iSCSl client devices can set the required MTU setting for the port.
- C. GVRP VLAN information can be used to dynamically add VLANs to a trunk
- D. iSCSl client devices can request to have flow control enabled
- E. Voice VLANs can be automatically configured for VoIP phones
Answer: A,E
Explanation:
These are two benefits enabled by LLDP-MED (Link Layer Discovery Protocol - Media Endpoint Discovery). LLDP-MED is an extension of LLDP that provides additional capabilities for network devices such as VoIP phones and APs. One of the capabilities is to automatically configure voice VLANs for VoIP phones, which allows them to be placed in a separate VLAN from data devices and receive QoS and security policies. Another capability is to request power as needed from PoE-enabled switch ports, which allows APs to adjust their power consumption and performance based on the available power budget. The other options are incorrect because they are either not enabled by LLDP-MED or not related to LLDP-MED. Reference: https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-qos/lldp-med.htm https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/poe.htm
NEW QUESTION # 33
Which statements are true about VSX LAG? (Select two.)
- A. LAG traffic is passed over VSX ISL links only while upgrading firmware on the switch pair
- B. Outgoing traffic is switched to a port based on a hashing algorithm which may be either switch in the pair
- C. Outgoing traffic is preferentially switched to local members of the LAG.
- D. Up to 255 VSX lags can be configured on all 83xx and 84xx model switches.
- E. The total number of configured links may not exceed 8 for the pair or 4 per switch
Answer: C,E
Explanation:
The correct answers are A and D.
According to the web search results, VSX LAG is a feature that allows multiple PSKs to be used on a single SSID, providing device-specific or group-specific passphrases for enhanced security and deployment flexibility for headless IoT devices1. VSX LAGs span both aggregation switches and appear as one device to partner downstream or upstream devices or both when forming a LAG with the VSX pair2.
One of the statements that is true about VSX LAG is that the total number of configured links may not exceed 8 for the pair or 4 per switch1. This means that a VSX LAG across a downstream switch can have at most a total of eight member links, and a switch can have a maximum of four member links. When creating a VSX LAG, it is recommended to select an equal number of member links in each segment for load balancing1.
Another statement that is true about VSX LAG is that outgoing traffic is preferentially switched to local members of the LAG2. This means that when active forwarding and active gateway are enabled, north-south and south-north traffic bypasses the ISL link and uses the local ports on the switch. This optimizes the traffic path and reduces the load on the ISL link2.
The other statements are false or not relevant for VSX LAG. Outgoing traffic is not switched to a port based on a hashing algorithm, which may be either switch in the pair. This is a characteristic of MLAG (Multi-Chassis Link Aggregation), which is a different feature from VSX LAG. LAG traffic is not passed over VSX ISL links only while upgrading firmware on the switch pair. This is a scenario that may occur when performing hitless upgrades, which is a feature that allows software updates without impacting network availability. The number of VSX lags that can be configured on all 83xx and 84xx model switches is not 255, but depends on the switch model and firmware version. For example, the AOS-CX 10.04 supports up to 64 VSX lags for 8320 switches and up to 128 VSX lags for 8325 and 8400 switches.
NEW QUESTION # 34
List the firewall role derivation flow in the correct order
Answer:
Explanation:
Explanation
According to the Aruba Documentation Portal1, the firewall role derivation flow in the correct order is:
* Server derived role
* User derived role
* Authentication default role
* Initiation role assigned
NEW QUESTION # 35
When configuring UBT on a switch what will happen when a gateway role is not specified?
- A. The gateway will send back the deny role to the client.
- B. The switch will assign the default deny role to the client.
- C. The gateway will assign a default role to the client
- D. The switch will put the client on the access VLAN
Answer: D
Explanation:
Explanation
According to the Aruba Documentation Portal1, user-based tunneling (UBT) is a feature that uses GRE to tunnel ingress traffic on a switch interface to a gateway for further processing. UBT enables a switch to provide a centralized security policy, using per-user authentication and access control to ensure consistent access and permissions.
Option A: The switch will put the client on the access VLAN
This is because option A shows how UBT works on an Aruba switch. When a device connects to the network, it is authenticated using either MAC Authentication or 802.1X and triggers an enforcement policy from ClearPass, which contains an enforcement profile with a user role configuration. The user role can be assigned locally on the switch or on ClearPass as part of an enforcement profile. The user role determines the VLAN that the device belongs to and the access policies that apply to it23.
Therefore, option A is correct.
1: https://www.arubanetworks.com/techdocs/central/latest/content/nms/aos-cx/cfg/conf-cx-ubt.htm 2:
https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7696/GUID-581D2976-694B-46C7-849
https://community.arubanetworks.com/viewdocument/?DocumentKey=c740df4e-3e26-4cc5-9126-355a18709c4
NEW QUESTION # 36
Match the solution components of NetConductor (Options may be used more than once or not at all.)
Answer:
Explanation:
Explanation
Client Insights matches with Built in , AI powered client visibility and fingerprinting capability that leverages infrastructure telemetry and ML based classification models to eliminate network bling spots Client Insights is a solution component of NetConductor that provides built-in, AI-powered client visibility and fingerprinting capability that leverages infrastructure telemetry and ML-based classification models to eliminate network blind spots. Client Insights uses machine learning to automatically detect, identify, and classify devices on the network, such as IoT devices, BYOD devices, or rogue devices. Client Insights also provides behavioral analytics and anomaly detection to monitor device performance and security posture.
Client Insights helps network administrators gain visibility into the device landscape, enforce granular access policies, and troubleshoot issues faster. References:
https://www.arubanetworks.com/products/network-management-operations/central/netconductor/
https://www.arubanetworks.com/assets/wp/WP_NetConductor.pdf
Cloud Auth matches with Enables fictionless onboarding of end users and client devices either through MAC address-based authentication or through integrations with common cloud identity stores Cloud Auth is a solution component of NetConductor that enables frictionless onboarding of end users and client devices either through MAC address-based authentication or through integrations with common cloud identity stores. Cloud Auth is a cloud-native network access control (NAC) solution that is delivered via Aruba Central. Cloud Auth allows network administrators to define user and device groups, assign roles and policies, and enforce access control across wired and wireless networks. Cloud Auth supports MAC authentication for devices that do not support 802.1X, as well as integrations with cloud identity providers such as Azure AD, Google Workspace, Okta, etc. References:
https://www.arubanetworks.com/products/network-management-operations/central/netconductor/
https://www.arubanetworks.com/assets/wp/WP_NetConductor.pdf
The Fabric Wizard matches with Simplifies the creation of the overlays using an intuitive graphical user interface and automatic generation of configuration instructions that are pushed to switches and gateways The Fabric Wizard is a solution component of NetConductor that simplifies the creation of the overlays using an intuitive graphical user interface and automatic generation of configuration instructions that are pushed to switches and gateways. The Fabric Wizard is a tool that allows network administrators to design, deploy, and manage overlay networks using VXLAN and EVPN protocols. The Fabric Wizard provides a graphical representation of the network topology, devices, and links, and allows users to drag and drop virtual components such as VRFs, VLANs, and subnets. The Fabric Wizard also generates the configuration commands for each device based on the user input and pushes them to the switches and gateways via Aruba Central. References:
https://www.arubanetworks.com/products/network-management-operations/central/netconductor/
https://www.arubanetworks.com/assets/wp/WP_NetConductor.pdf
Policy Manager matches with Defines user and device groups and creates the associated traffic routing and access enforcement rules for the physical network Policy Manager is a solution component of NetConductor that defines user and device groups and creates the associated traffic routing and access enforcement rules for the physical network. Policy Manager is a tool that allows network administrators to create and manage network policies based on user and device identities, roles, and contexts. Policy Manager uses Group Policy Identifier (GPID) to carry policy information in traffic for in-line enforcement. Policy Manager also integrates with Cloud Auth, ClearPass, or third-party solutions to provide flexible network access control. References:
https://www.arubanetworks.com/products/network-management-operations/central/netconductor/
https://www.arubanetworks.com/assets/wp/WP_NetConductor.pdf
NEW QUESTION # 37
......
HP HPE7-A01 Test Engine PDF - All Free Dumps: https://www.suretorrent.com/HPE7-A01-exam-guide-torrent.html
Get New HPE7-A01 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=15ND58ykEosA_btLpMNQRvNEslkOoXhTc