[Nov 19, 2024] Get Free Updates Up to 365 days On Developing 200-301 Braindumps [Q406-Q429]

[Nov 19, 2024] Get Free Updates Up to 365 days On Developing 200-301 Braindumps

Best Quality Cisco 200-301 Exam Questions

Cisco 200-301 is an entry-level certification exam for network engineers, which is designed to validate their knowledge and skills in networking fundamentals. 200-301 exam is the replacement for the previous CCNA certification exams, and it covers a wide range of topics related to network technologies, including network access, IP connectivity, IP services, security fundamentals, automation and programmability.

NEW QUESTION # 406
Which three commands can you use to set a router boot image? (Choose three.)

A. Router (config)# boot system flash c4500-p-mz.121-20.bin
B. Router (config)# boot system tftp c7300-js-mz.122-33.SB8a.bin
C. Router (config)#boot bootldr bootflash:c4500-jk9s-mz.122-23f.bin
D. Router (config)#boot system rom c7301-advipservicesk9-mz.124-24.T4.bin
E. Router> boot flash:c180x-adventerprisek9-mz-124-6T.bin
F. Router (config)#boot flash:c180x-adventerprisek9-mz-124-6T.bin

Answer: A,B,D

NEW QUESTION # 407
Drag the IPv6 DNS record types from the left onto the description on the right.

Answer:

Explanation:

https://ns1.com/resources/dns-types-records-servers-and-queries#:~:text=Address%20Mapping%20record%20(A%20Record,a%20hostname%20to%20another%20hostname.

NEW QUESTION # 408

Refer to the exhibit. If OSPF is running on this network, how does Router2 handle traffic from Site B to
10.10.13.128/25 at Site A?

A. It sends packets out of interface Fa0/2 only.
B. It load-balances traffic out of Fa0/1 and Fa0/2.
C. It cannot send packets to 10.10.13.128/25.
D. It sends packets out of interface Fa0/1 only.

Answer: C

Explanation:
Section: IP Connectivity
Explanation:
Router2 does not have an entry for the subnet 10.10.13.128/25. It only has an entry for 10.10.13.0/25, which ranges from 10.10.13.0 to 10.10.13.127.

NEW QUESTION # 409
What is the purpose of traffic shaping?

A. to mitigate delays over slow links
B. be a marking mechanism that identifies different flows
C. to provide fair queuing for buffered flows
D. to limit the bandwidth that a flow can use to

Answer: C

Explanation:
Traffic shaping retains excess packets in a queue and then schedules the excess for later transmission over increments of time.
https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-policing/19645- policevsshape.html#policingvsshaping

NEW QUESTION # 410
Two switches have been implemented and all interfaces are at the default configuration level. A trunk link must be implemented between two switches with these requirements:
* using an industry-standard trunking protocol
* permitting VLANs 1 -10 and denying other VLANs
How must the interconnecting ports be configured?

Answer: A

NEW QUESTION # 411
If router R1 knows a static route to a destination network and then learns about the same destination network through a dynamic routing protocol, how does R1 respond?

A. It prefers the static route
B. It disables the routing protocol
C. It sends a withdrawal signal to the neighboring router
D. It refuses to advertise the dynamic route to other neighbors

Answer: A

NEW QUESTION # 412
How does HSRP provide first hop redundancy?

A. It uses a shared virtual MAC and a virtual IP address to a group of routers that serve as the default gateway for hosts on a LAN
B. It load-balances Layer 2 traffic along the path by flooding traffic out all interfaces configured with the same VLAN.
C. It forwards multiple packets to the same destination over different routed links n the data path
D. It load-balances traffic by assigning the same metric value to more than one route to the same destination m the IP routing table.

Answer: A

Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-mgo.html

NEW QUESTION # 413
Refer to the exhibit.

How many objects are present in the given JSON-encoded data?

A. seven
B. one
C. four
D. nine

Answer: C

NEW QUESTION # 414
Refer to the exhibit. A newly configured PC fails to connect to the internet by using TCP port 80 to www.cisco.com. Which setting must be modified for the connection to work?

A. Default Gateway
B. DHCP Servers
C. Subnet Mask
D. DNS Servers

Answer: D

NEW QUESTION # 415
Refer to the graphic. R1 is unable to establish an OSPF neighbor relationship with R3. What are possible reasons for this problem? (Choose two.)

A. All of the routers need to be configured for backbone Area 1.
B. R1 and R3 are configured in different areas.
C. The hello and dead interval timers are not set to the same values on R1 and R3.
D. A static route has been configured from R1 to R3 and prevents the neighbor adjacency from being established.
E. R1 and R2 are the DR and BDR, so OSPF will not establish neighbor adjacency with R3.
F. EIGRP is also configured on these routers with a lower administrative distance.

Answer: B,C

Explanation:
Section: IP Connectivity
Explanation:
This question is to examine the conditions for OSPF to create neighborhood. So as to make the two routers become neighbors, each router must be matched with the following items:
1. The area ID and its types
2. Hello and failure time interval timer
3. OSPF Password (Optional)

NEW QUESTION # 416
Refer to the exhibit. How will the router handle a packet destined for 192.0.2.156?

A. The router will drop the packet.
B. The router will forward the packet via either Serial0 or Serial1.
C. The router will return the packet to its source.
D. The router will forward the packet via Serial2.

Answer: D

Explanation:
Section: IP Connectivity

NEW QUESTION # 417
Drag and drop the device behaviors from the left onto the matching HSRP slate on the right.

Answer:

Explanation:

NEW QUESTION # 418
Drag and drop the characteristic from the left onto the IPv6 address type on the right.

Answer:

Explanation:

Explanation:

NEW QUESTION # 419
Which two options are the best reasons to use an IPV4 private IP space? (Choose two.)

A. to connect applications
B. to conserve global address space
C. to manage routing overhead
D. to enable intra-enterprise communication
E. to implement NAT

Answer: B,D

Explanation:
Section: Network Fundamentals

NEW QUESTION # 420
Refer to the exhibit.

What does router R1 use as its OSPF router-ID?

A. 192.168.0.1
B. 172.16.15.10
C. 10.10.10.20
D. 10.10.1.10

Answer: B

Explanation:
Explanation
OSPF uses the following criteria to select the router ID:1. Manual configuration of the router ID (via the
"router-id x.x.x.x" command under OSPF router configuration mode).2. Highest IP address on a loopback interface.3. Highest IP address on a non-loopback and active (no shutdown) interface.

NEW QUESTION # 421
Drag and drop the QoS congestion management terms from the left onto the description on the right.

Answer:

Explanation:

NEW QUESTION # 422
What is the path for traffic sent from one user workstation to another workstation on a separate switch in a three-tier architecture model?

A. access - distribution - core - distribution - access
B. access - core - access
C. access - distribution - distribution - access
D. access - core - distribution - access

Answer: C

NEW QUESTION # 423
Refer to the exhibit.

How does the router manage traffic to 192.168.12.16?

A. it load-balances traffic between all three routes
B. It chooses the EIGRP route because it has the lowest administrative distance
C. It chooses the OSPF route because it has the longest prefix inclusive of the destination address.
D. It selects the RIP route because it has the longest prefix inclusive of the destination address.

Answer: D

NEW QUESTION # 424
Drag and drop to the characteristics of networking from the left onto the correct networking types on the right.

Answer:

Explanation:

NEW QUESTION # 425
Which type of wireless encryption is used for WPA2 in preshared key mode?

A. RC4
B. TKIP with RC4
C. AES-256
D. AES-128

Answer: C

Explanation:
Explanation
We can see in this picture we have to type 64 hexadecimal characters (256 bit) for the WPA2 passphrase so we can deduce the encryption is AES-256, not AES-128.

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/67134-wpa2-config.html

NEW QUESTION # 426
Which type of routing protocol operates by exchanging the entire routing information?

A. distance vector protocols
B. path vector protocols
C. link state protocols
D. exterior gateway protocols

Answer: A

NEW QUESTION # 427
A wireless administrator has configured a WLAN; however, the clients need access to a less congested 5-GHz network for their voice quality. What action must be taken to meet the requirement?