NS0-519 Free Exam Questions & Answers PDF Updated on Jan-2022
Latest NS0-519 Exam Dumps Recently Updated 60 Questions
NEW QUESTION 16
Click the Exhibit button.
You have an 8-node AFF A800 ONTAP 9.7 cluster. You have sixteen SVMs that serve NVMe namespaces using two 32 Gb FC ports per AFF A800 controller.
Referring to the exhibit, what is the maximum number of NVMe data LIFs that are supported on this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 17
You have a 2-node AFF A220 switchless cluster serving iSCSI LUNs. NetApp Volume Encryption (NVE) is enabled on all data volumes. You are asked to consolidate identical boot LUNs that are on both controllers. You need to nondisruptively consolidate LUNs with the highest storage efficiency.
In this scenario, which NetApp ONTAP technology accomplishes this task?
- A. LIF migrate
- B. LUN move
- C. volume move
- D. aggregate relocate
Answer: C
NEW QUESTION 18
Click the Exhibit button.
Referring to the exhibit, how many LUNs should the server administrator see on the Windows 2016 host?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 19
You have an AFF A220 cluster connected to a dual fabric topology. You must ensure that SAN hosts do not lose access to LUNs during unplanned failures.
Which two operations should be performed to accomplish this task? (Choose two.)
- A. Initiate a reboot of one Fibre Channel switch.
- B. Manually set all LUNs offline.
- C. Turn the power off on one disk shelf.
- D. Manually set all FC LIFs on a single node to "down".
Answer: A,D
NEW QUESTION 20
You just finished installing and configuring a new NetApp AFF All SAN Array environment.
In this scenario, which two tools would you use to verify that the environment satisfies best practices? (Choose two.)
- A. Active IQ Unified Manager
- B. ONTAP System Manager
- C. Active IQ OneCollect
- D. Active IQ Config Advisor
Answer: A,D
NEW QUESTION 21
You plan to use Foreign LUN Import (FLI) to migrate data from an older storage array to an ONTAP cluster. You have properly cabled the storage array and the NetApp nodes to your dual-fabric SAN.
Which two steps are required for this migration and cutover? (Choose two.)
- A. Add NetApp WWN target ports to the existing zones so that your hosts can access both storage arrays.
- B. Create two zones that contain NetApp initiator ports and the source storage target ports, one for each fabric.
- C. Add NetApp WWN initiator ports to the existing zones.
- D. Create two zones that contain the NetApp target ports and the host initiators ports, one for each fabric.
Answer: A,D
NEW QUESTION 22
Click the Exhibit button.
Referring to the exhibit, which switch in the fabric is the principal switch?
- A. sw4
- B. sw10
- C. sw5
- D. sw6
Answer: D
NEW QUESTION 23
Click the Exhibit button.
Referring to the exhibit, which container obtains space savings from deduplication, compression, and compaction?
- A. the aggregate
- B. the qtree
- C. the LUN
- D. the volume
Answer: A
NEW QUESTION 24
Click the Exhibit button.
Referring to the exhibit, which two configuration elements are required to configure an SVM to support NVMe on Red Hat Enterprise Linux? (Choose two.)
- A. Set the security style to Mixed (UNIX and NTFS).
- B. In Data Protocols, choose both FC/FCoE and NVMe protocols.
- C. In Data Protocols, choose only the NVMe protocol.
- D. Set the security style to UNIX.
Answer: B,D
NEW QUESTION 25
Click the Exhibit button.
You issue the cfgshow command on one of your Brocade switches and notice that there is no zoning listed under the Effective configuration. When you attempt to use the fcping command from the initiator to the target, the command fails.
Referring to the exhibit, what are two problems? (Choose two.)
- A. There is no zoning configured, and the default zone's access is set to No Access.
- B. The default zone access is set to allow even though zoning is defined.
- C. There is no zone defined that has both the initiator and target in a common zone.
- D. There is no alias for either the initiator or the target.
Answer: A,C
NEW QUESTION 26
You are in the testing phase of a newly deployed NVMe over Fibre Channel (NVMe/FC) SAM environment using Asynchronous Namespace Access (ANA). You are unable to successfully fail over a workload.
In this scenario, which action should you perform?
- A. Verify that multi-initiator zoning is configured on the FC switches.
- B. Verify that the host operating system version supports ANA.
- C. Verify that the NVMe/FC host utilities kit is installed for ANA.
- D. Verify that the DM-Multipath driver is configured for ANA.
Answer: D
NEW QUESTION 27
An administrator added the FCP protocol to an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Which two statements describe how to solve this problem? (Choose two.)
- A. Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LUN.
- B. Perform takeover and giveback of both controllers.
- C. Disable and enable the FC port with the attached host, causing a FLOGI.
- D. Create a zone with a single initiator and the target LIF's WWPN.
Answer: A,D
NEW QUESTION 28
What information should you document about your storage fabrics? (Choose two.)
- A. zoning configuration
- B. igroup name
- C. name service
- D. Inter-Switch Links (ISLs)
Answer: A,D
NEW QUESTION 29
You have 20 hosts, each with a single connection to one FC target port of an ONTAP HA pair. Each initiator is configured to limit the number of SCSI commands to 64 for each initiator-target connection. You plan to add 20 more hosts with the same number of connections.
In this scenario, how should you configure the queue depth limit?
- A. Each host's queue depth should be set to 64.
- B. The sum of all hosts' queue depths per each target port should be less than or equal to 2048.
- C. Each host's queue depth should be set to 128.
- D. The sum of all hosts' queue depths per each target port should be less than or equal to 4096.
Answer: A
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, you need to reduce the number of paths from the host to the LUNs.
Which three would reduce the number of paths? (Choose three.)
- A. ALUA
- B. Asymmetric Namespace Access (ANA)
- C. switch zoning
- D. Selective LUN Map (SLM)
- E. port sets
Answer: C,D,E
NEW QUESTION 31
A customer has decided to repurpose a NetApp FC target card from an older system. After installing the card into the newer NetApp AFF, the system kernel panics on boot.
Which tool would you use determine the problem?
- A. Interoperability Matrix Tool (IMT)
- B. Hardware Universe (HWU)
- C. OnCommand Insight (OCI)
- D. Active IQ OneCollect
Answer: B
NEW QUESTION 32
Your company has begun to require additional restrictions on systems in the cloud. To comply with these new restrictions, you must have all incoming connections authorized to your Cloud Volumes ONTAP instance in Amazon Web Services (AWS).
Which two features enable you to satisfy your company's requirements for Red Hat Enterprise Linux 7 iSCSI hosts? (Choose two.)
- A. routing failover groups
- B. Challenge-Handshake Authentication Protocol (CHAP)
- C. iSCSI endpoint isolation
- D. single initiator zoning
Answer: B,C
NEW QUESTION 33
You are asked to increase the size of your existing 4-node FAS8060 cluster running ONTAP 9.7 software with four additional AFF A700 nodes.
Which tool enables you to confirm that this will be a valid addition?
- A. Hardware Universe (HWU)
- B. Active IQ
- C. Active IQ Config Advisor
- D. Active IQ OneCollect
Answer: A
NEW QUESTION 34
......
Network Appliance NS0-519 Real 2022 Braindumps Mock Exam Dumps: https://www.suretorrent.com/NS0-519-exam-guide-torrent.html