Easy To Download SAP C_IBP_2105 Exam Dumps Updated 82 Questions
New Updated C_IBP_2105 Exam Questions 2021
SAP IBP Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books | Weighting |
|---|---|---|
| Solution Architecture | Describe the benefits of implementing SAP's Integrated Business Planning solution. IBP100, IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | < 8% |
| Demand Planning | Create statistical forecast using historical data with basic methods. IBP200 (SAP IBP OD 2105), IBP600 (SAP IBP OD 2105) | 8% - 12% |
| Inventory | Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. IBP100 | < 8% |
| Key Figures & Attributes | Create and use key figures and attributes. IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | > 12% |
| General Configuration of a Planning Area | Display, create, copy, edit, check, and activate a planning area. IBP200 (SAP IBP OD 2105) | > 12% |
| User Interface | Use the Fiori Launchpad to customize the UI, work with Excel UI IBP200 (SAP IBP OD 2105) | > 12% |
| Analytics and Reporting | Define and view information with user-defined charts and dashboards. IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | < 8% |
| Planning Operators & Application Jobs | Use Planning Operators. IBP300 (SAP IBP OD 2105) | > 12% |
| Supply and Response | Configure supply planning, run various solvers to generate planning results IBP100, IBP110, IBP200 (SAP IBP OD 2105), IBP700 (SAP IBP OD 2105) | > 12% |
| S&OP Review | Describe how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans. IBP200 (SAP IBP OD 2105) | < 8% |
NEW QUESTION 46
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct Answers to this question.
- A. It should be a non-key attribute of the master data type.
- B. The length of the attribute needs to be 18 digits.
- C. It belongs to a simple or compound master data type.
- D. Its data type is INTEGER and its length has been specified.
Answer: A,C
NEW QUESTION 47
Model configuration allows the attributes of a master data type to be assigned as key figures. Which features are relevant for this type of object?
- A. This object provides a single value for a unique planning combination.
- B. This object contains user-defined criteria that monitor execution of business plans.
- C. This type of key figure is not usually stored and it cannot be set to editable.
- D. This object is not exposed to the user in planning views or modeling.
Answer: A
NEW QUESTION 48
What differentiates the Create New (Simple copy) and the Create New with Dependencies (Advanced copy) functions of a planning area? Note: There are 2 correct Answers to this question.
- A. The planning view favorites are only copied when you use the Advanced copy.
- B. Master data is only shared between the original and the new planning area when you use the Create New (Simple copy) function.
- C. A copy of the time profile is only created when you use the Create New with Dependencies (Advanced copy) function.
- D. Associated attributes are only shared between the original and the new planning area when you use the Create New (Simple copy) function.
Answer: B,C
NEW QUESTION 49
Which of the following configuration options are part of the new key figure creation process? Note:
There are 3 correct Answers to this question.
- A. Hiding or displaying totals for the key figure
- B. Setting disaggregation logic for the key figure
- C. Enabling planning notes for the key figure
- D. Enabling fixing for the key figure
- E. Setting permitted planning levels
Answer: B,C,D
NEW QUESTION 50
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.
- A. Link two analytics charts.
- B. Rename the charts.
- C. Organize charts.
- D. Add process templates.
- E. Display all assigned analytics on a single UI.
Answer: C,D,E
NEW QUESTION 51
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process?
Note: There are 2 correct Answers to this question.
- A. Splitting the values from aggregated to detailed level based on stored split-factor key figure
- B. Splitting the values from detailed to aggregated level by using copy operator
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from aggregated to detailed level based on time profile attribute
Answer: A,C
NEW QUESTION 52
What function would you use to configure a year-to-date calculation?
- A. Rolling Aggregation
- B. Dynamic Rolling Aggregation
- C. Cumulative Aggregation
- D. Last Period Aggregation
Answer: C
NEW QUESTION 53
Where can we see the results of Time Series analysis in SAP IBP?
- A. Time Series Property Attribute in Customer
- B. Time Series Property Attribute in Customer Product
- C. Time Series Property Attribute in Customer Source
- D. Time Series Property Attribute in Product
Answer: D
NEW QUESTION 54
Which conditions are prerequisites for key figure disaggregation?
- A. The key figure is calculated and editable.
- B. The key figure is set to Not Editable.
- C. The key figure is stored and editable.
- D. The key figure is calculated and aggregation mode is selected.
Answer: C
NEW QUESTION 55
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Change the past and future horizon of the levels in the time profile.
- B. Add a new time profile level to the time profile.
- C. Change the description of the attributes in the time profile.
- D. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
Answer: A,C
NEW QUESTION 56
When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them? Note: There are 2 correct Answers to this question.
- A. SAP IBP for sales and operations
- B. SAP IBP for demand
- C. SAP IBP for response and supply
- D. DDMRP
Answer: A,C
NEW QUESTION 57
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.
- A. Disaggregation according to an equal split
- B. Proportional disaggregation by using KF2 in the expression
- C. Disaggregation according to a user-defined expression
- D. Disaggregation in batch triggered by an application job
- E. An internal system-generated disaggregation
Answer: A,B,C
NEW QUESTION 58
How can you check if key figure is editable or non-editable?
- A. Using the Edit View and then the Edit Planning View option
- B. Using the Web-based Planning app when selecting key figures
- C. Using the Key Figure Calculations app
- D. Using the Analytics Advanced app when selecting key figures
Answer: B
NEW QUESTION 59
Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are
2 correct Answers to this question.
- A. A basic demand planning process
- B. Finite resource planning
- C. Manual creation of feasible constrained plans
- D. An advanced demand planning process
Answer: A,B
NEW QUESTION 60
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct Answers to this question.
- A. Analyze forecast accuracy by product class.
- B. Identify inventory items that require closer attention.
- C. Tailor your forecast strategy and inventory optimization to segment characteristics.
- D. Assign more appropriate inventory algorithms to planning objects.
Answer: A,C
NEW QUESTION 61
Which of the following stages can be modeled using scenarios from the S&OP planning cycle? Note:
There are 2 correct Answers to this question.
- A. Demand review
- B. Demand sensing stage
- C. Demand-supply balancing
- D. Data input review for inventory
Answer: A,C
NEW QUESTION 62
Why would you set up a cascading filter in the planning view? Note: There are 2 correct Answers to this question.
- A. To filter attributes based on specific values
- B. To filter attributes based on other attribute filters
- C. To filter using attributes that have a large number of values
- D. To filter data in an Application Job template
Answer: B,C
NEW QUESTION 63
You run a what-if analysis and use the scenario planning function. Which actions can you perform? Note:
There are 3 correct Answers to this question.
- A. Run a scenario-specific demand sensing job.
- B. Display data in analytics.
- C. Share data with other users.
- D. Run a scenario-specific inventory optimization job.
- E. Change scenario-specific master data.
Answer: B,C,D
NEW QUESTION 64
......
SAP IBP Certification Exam Details:
| Exam Name | SAP Certified Application Associate - SAP Integrated Business Planning |
| Exam Price | $550 (USD) |
| Passing Score | C_IBP_2105 - 64% |
| Exam Code | C_IBP_2105 |
| Sample Questions | SAP IBP Certification Sample Questions |
| Level | Associate |
| Schedule Exam | SAP Training |
| Duration | 180 mins |
| Number of Questions | 80 |
| Reference Books | IBP100, IBP110, IBP200, IBP700, IBP300, IBP600 |
Updated Free SAP C_IBP_2105 Test Engine Questions with 82 Q&As: https://www.suretorrent.com/C_IBP_2105-exam-guide-torrent.html