Get New 2021 Network Appliance exam NS0-527 Dumps Bundle On flat Updated Dumps!
Full NS0-527 Practice Test and 215 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 35
A volume has been filled completely by active data and Snapshot copies.
What must you do to make the volume writable again?
- A. Delete files in the active file system.
- B. Delete any SnapMirror relationships.
- C. Modify the Snapshot reserve.
- D. Delete enough Snapshot copies untilspace is available.
Answer: D
NEW QUESTION 36
You have downloaded a user-created OnCommandWorkFlow Automation (WFA) content pack from the NetApp communities Web site and wantto import it into your environment.
Which two statements are true in this scenario? (Choose two.)
- A. The file must be imported through the WFA Web portal.
- B. The .exe file can be run directly onthe WFA server.
- C. You must unpack the zip file before importing it.
- D. The .obj file can be placed directly in the content folder on the WFA server.
Answer: A,B
NEW QUESTION 37
A customer is running multiple Oracle DBs over NFS. The volumes are replicated using
SnapMirror to a secondary site, which also hosts the development and test systems. They want to streamline the creation of test environments on the secondary site so that they will not have to manually use FlexClone to clone multiple volumes for each request.
In this scenario, which tool satisfies these requirements?
- A. OnCommand Workflow Automation
- B. OnCommand Unified Manager
- C. Snap Creator Framework
- D. NetApp Service Level Manager
Answer: C
NEW QUESTION 38
Management wants the ability totransfer more data over a low bandwidth network connection.
Which action would satisfy the request?
- A. Enable version flexible replication with a SnapMirror policy.
- B. Modify the SnapMirror schedules.
- C. Disable throttle with a SnapMirror policy.
- D. Enable network compression with a SnapMirror policy.
Answer: D
NEW QUESTION 39
What is a NetApp Snapshot copy?
- A. a SnapVault target
- B. a read-only copy of a FlexVol
- C. a SnapProtectMediaAgent
- D. a SnapMirror destination volume
Answer: B
NEW QUESTION 40
Your customercomplains that their NDMP application can back up data only on a specific NetApp cluster node. You know the customer has recently upgraded all their cluster nodes to clustered Data ONTAP.
What would you recommend to solve their NDMP problems?
- A. Change their NDMP configuration from Node-Scoped to SVM-Scoped mode.
- B. The NDMP environment variables should be configured to allow the Node-Scoped behavior to backup data on any cluster node.
- C. Have the customer verify their firewall configuration to allow the NDMP control connection to pass from one cluster node to the other.
- D. Have the customer implement a scripted solution to move their NDMP data and control connections to the necessary cluster node.
Answer: A
NEW QUESTION 41
You configured a SnapMirror relationship with a default policy for the daily mirroring of a volume which contains financial data. Although the data is critical, it only changes on a monthly basis.
Using On Command System Manager, whichtwo actions would change the frequency of the SnapMirror updates? (Choose two.)
- A. Select or create a different schedule.
- B. Select or create a different policy.
- C. Edit the parameters of the default policy.
- D. Edit the parameters of the default schedule.
Answer: B,C
NEW QUESTION 42
Your customer wants to be notified of SnapMirror lag errorswithin 15 minutes. The customer is not interested in maintaining custom scripts.
How would you accomplish this task?
- A. Use OnCommand System Manager to create a warning alert for SnapMirror lag.
- B. Use OnCommand Unified Manager to create an error alert for SnapMirror Relationship lag.
- C. Use OnCommand System Manager to notify on Protection Health errors.
- D. Use OnCommand Unified Manager to generateVolume Transfer Status reports on a schedule.
Answer: B
NEW QUESTION 43
A customer is using SnapMirror to replicate their data to a remote site. They notice that storage efficiency is nor preserved, and the amount of data at the destination is higher than expected.
In this scenario, which configuration in the destination volume would cause this issue?
- A. The volumes are not thin-provisioned on the destination.
- B. There is an existing FlexClone volume on the destination.
- C. Post process compression is enabled on the destination.
- D. Post process deduplication is enabled on the destination.
Answer: B
NEW QUESTION 44
A volume on a FabricPool-enabled aggregate is consuming 10 TB of the performance tier and 90 TB of the cloud tier. A SnapMirror copy needs to be created on a FabricPool-enabled peer cluster at a disaster recovery location.
In this scenario, how much data is transferred when the SnapMirror relationship is initialized?
- A. 200 TB
- B. 10 TB
- C. 90 TB
- D. 100 TB
Answer: D
NEW QUESTION 45
A customer wants to assign a user to a build-in SnapCenter RBAC Role that will allow them to review and start existing SnapMirror processes only.
In this scenario, which Role will allow the customer to accomplish this task?
- A. App Backup and Clone Admin
- B. SnapCenter Admin
- C. Backup and Clone Viewer
- D. Infrastructure Admin
Answer: B
NEW QUESTION 46
You must determine if there have been any backup problems overnight.
Which two reports in OnCommand Unified Manager 6.2 would provide you with the required information? (Choose two.)
- A. On Command Job Events Details
- B. On Command Unified Manager Dashboard
- C. OnCommand Cluster Events Details
- D. Unresolved Incidents and Risks area
Answer: A,B
NEW QUESTION 47
You have multiple load-sharing destinations for a volume in a storage virtual machine. The source volume has become unavailable and you want to make one of the destination volumes the new source.
What happens to the original source volume?
- A. The promote operation deletes the original source volume.
- B. The original source volume goes offline.
- C. The promoteoperation takes the original source volume offline.
- D. The initialize operation deletes the original source volume.
Answer: A
NEW QUESTION 48
Which two statements are correct about MetroCluster IP requirements for intercluster LIFs? (Choose two.)
- A. Either an IPv6 address or IPv4 address is required.
- B. At least one interface per node is required.
- C. A dedicated network port is required.
- D. Jumbo frames are required.
Answer: A,C
NEW QUESTION 49
You areusing SnapLock for SnapVault to protect Snapshot copies on secondary storage. In ONTAP 9.3, which source aggregate feature is supported in this scenario?
- A. SnapLock Compliance
- B. RAID-TEC
- C. SnapLock Enterprise
- D. 32 bit
Answer: B
NEW QUESTION 50
You need to restore a file from yesterday's backup. You know that a Snapshot copy is in place on the volume where the data is stored. Other users are notcomplaining about lost or corrupt data on the volume.
All users are running Windows 7 on desktop computers.
How would you recover the file quickly without disrupting other users' data?
- A. Have the user right-click on the file in the Windows folder, then select "Restore previous versions" from the list of choices.
- B. Perform a SnapRestore of the entire volume where the file resides.
- C. Call the backup administrator andhave them load the tape from yesterday's backup and restore the file.
- D. Have the customer reboot the Windows computer to see if the file is really corrupt.
Answer: A
NEW QUESTION 51
You have recently installed and set up a new NetApp HCI deployment in your data center that consists of four compute nodes and four storage nodes. Inside this HCI deployment, you are using ONTAP Select for file services. You must protect the data inside the ONTAP Select VM in case of a rack failure.
Which two methods would accomplish this task? (Choose two.)
- A. Replicate the volumes using SnapMirror from inside the ONTAP Select VM to an existing ONTAP cluster.
- B. Using SolidFire real-time remote replication, replicate the hosting volumes to an ONTAP cluster.
- C. Replicate the SVMs from inside the ONTAP Select VM to an existing ONTAP cluster using SVM DR.
- D. Enable FabricPools in the ONTAP Select instance.
Answer: B,C
NEW QUESTION 52
Your customer wants to implement version flexible SnapMirror relationships. You want to advise the customer about some of the NetApp best practices regarding version flexible SnapMirror relationships.
Which two statements are true in this scenario? (Choose two.)
- A. The customer will need to upgradeclustered Data ONTAP on one cluster.
- B. The frequency for replicating volumes must be greater than 60 minutes when the versions of clustered Data ONTAP are not the same.
- C. You can set up version flexible SnapMirror relationships between Storage Virtual Machines, L-J but not clusters.
- D. You can create a relationship that transfers a specified set of Snapshot copies inaddition to the SnapMirror created Snapshot copies.
Answer: B,D
NEW QUESTION 53
Which technology uses synchronous replication?
- A. SnapMirror XDP
- B. SVM DR
- C. MetroCluster mirrored aggregate
- D. FabricPool
Answer: A
NEW QUESTION 54
You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1.
Which two actions mustbe performed for the SnapMirror relationships? (Choose two.)
- A. Break existing SnapMirror relationships.
- B. After the upgrade, resynchronize, and resume SnapMirror relationships.
- C. Delete the obsolete SnapMirror Snapshot copies which were created in Data ONTAP 8.3.
- D. Delete and re-create SnapMirror relationships.
Answer: A,B
NEW QUESTION 55
In clustered Data ONTAP, you are creating MirrorAndVault XDP relationships between existing primary and secondary volumes. The Snapshot copy policies have already been created and assigned. The peering is already established and functional.
In clustered Data ONTAP, which three actions should be taken? (Choose three.)
- A. Create the intercluster LIFs.
- B. Add the inter-cluster LIF to the broadcast domain.
- C. Create and initialize the SnapMirrorrelationship.
- D. Create the transfer policy.
- E. Set up the retention on the secondary volume.
Answer: C,D,E
NEW QUESTION 56
......
[Jul-2021] Pass Network Appliance NS0-527 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=157iBXwTioG_mQc6vzSHUIdrf9RsXqH3F
Reduce Your Chance of Failure in NS0-527 Exam: https://www.suretorrent.com/NS0-527-exam-guide-torrent.html