[May 02, 2023] Fully Updated Dumps PDF - Latest NSE6_FWF-6.4 Exam Questions and Answers
100% Free NSE6_FWF-6.4 Exam Dumps to Pass Exam Easily from SureTorrent
NEW QUESTION 18
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
- A. The new network must be manually assigned to a FortiAP profile.
- B. The wireless network interface must be assigned a Layer 3 address
- C. Security Fabric and HTTPS must be enabled on the wireless network interface
- D. The wireless network to Internet firewall policy must be configured
Answer: D
Explanation:
A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.
NEW QUESTION 19
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- B. Disable intra-vap-privacy for the Authors vap-wireless network
- C. Increase the transmission power of the AP radio interfaces
- D. For both interfaces in the wtp-profile, configure vap-all to be manual
Answer: A,D
NEW QUESTION 20
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Installation phase
- B. Hardware selection phase
- C. Project information phase
- D. Site survey phase
Answer: C,D
NEW QUESTION 21
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Reduce the number of wireless networks being broadcast by the AP
- B. Install another AP in the reception area to improve available bandwidth
- C. Enable frequency handoff on the AP to band steer clients
- D. Increase the transmission power of the AP radios
Answer: C
NEW QUESTION 22
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that cannot be used because of regulatory channel restrictions
- C. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: A
NEW QUESTION 23
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. An X.509 certificate to authenticate the client
- B. An X.509 to authenticate the authentication server
- C. A WPA2 or WPA3 personal wireless network
- D. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
- E. A WPA2 or WPA3 Enterprise wireless network
Answer: A,B
NEW QUESTION 24
Which two statements about background rogue scanning are correct? (Choose two.)
- A. Background rogue scanning requires DARRP to be enabled on the AP instance
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. A dedicated radio configured for background scanning can support the connection of wireless clients
- D. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
Answer: A,B
NEW QUESTION 25
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?
- A. Security Fabric
- B. FortiTelemetry
- C. HTTPS
- D. SSH
Answer: A
NEW QUESTION 26
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: B,D
NEW QUESTION 27
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 Enterprise wireless network
- B. An X.509 to authenticate the authentication server
- C. A WPA2 or WPA3 personal wireless network
- D. An X.509 certificate to authenticate the client
Answer: A,B
NEW QUESTION 28
Which factor is the best indicator of wireless client connection quality?
- A. The receive signal strength (RSS) of the client at the AP
- B. Downstream link rate, the connection rate for the AP to the client
- C. The channel utilization of the channel the client is using
- D. Upstream link rate, the connection rate for the client to the AP
Answer: D
NEW QUESTION 29
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user usage stats
- B. Provides real-time insight into user movements
- C. Provides real-time insight into user online activity
- D. Provides real-time insight into user purchase activity
Answer: A
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION 30
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Two wireless APs must be sending data
- B. SQL services must be running
- C. Wireless network security must be set to open
- D. DTLS encryption on wireless traffic must be turned off
Answer: A
Explanation:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
NEW QUESTION 31
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Preauthorize APs
- B. Set the wireless controller country setting
- C. Create wireless LAN specific policies
- D. Create a custom AP profile
Answer: D
NEW QUESTION 32
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. Security channels
- B. Control channels
- C. Data channels
- D. FortLink channels
Answer: B,C
Explanation:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION 33
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured for WPA2 or 3 Enterprise
- B. A VAP configured to authenticate using a radius server
- C. A VAP configured to authenticate locally on FortiGate
- D. A VAP configured for captive portal authentication
Answer: A,B
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION 34
......
Free NSE6_FWF-6.4 Exam Questions NSE6_FWF-6.4 Actual Free Exam Questions: https://www.suretorrent.com/NSE6_FWF-6.4-exam-guide-torrent.html
Verified NSE6_FWF-6.4 dumps and 31 unique questions: https://drive.google.com/open?id=1ixV7aYWvEVNDp7MMGtbaDLv3Ub-TL6W-