NSE6_FWF-6.4 PDF Dumps Dec 21, 2023 Exam Questions – Valid NSE6_FWF-6.4 Dumps
Ultimate NSE6_FWF-6.4 Guide to Prepare Free Latest Fortinet Practice Tests Dumps
NEW QUESTION # 16
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Set the wireless controller country setting
- B. Preauthorize APs
- C. Create wireless LAN specific policies
- D. Create a custom AP profile
Answer: D
NEW QUESTION # 17
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Short message service authentication
- B. Social networks authentication
- C. Software security token authentication
- D. Hardware security token authentication
Answer: A,B
NEW QUESTION # 18
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user movements
- B. Provides real-time insight into user usage stats
- C. Provides real-time insight into user purchase activity
- D. Provides real-time insight into user online activity
Answer: A
Explanation:
Explanation
(Page 88 Study Guide) "FortiPresence provides data and analytics based on demographic segmentation and visitor movement between areas" According to the web search results, FortiPresence location map functionality provides real-time insight into user movements. It uses the location data from the Fortinet access points to detect each visitor's smartphone Wi-Fi signal and track their location and behavior within the site. It also provides data visualization in a customizable format, such as heat maps and animated flows, to show the visitor traffic and movement patterns.
This geographical data analysis can help improve visitor experiences and business outcomes.
References: Location Analytics | FortiPresence 22.4.0 - Fortinet Documentation, FortiPresence Data Sheet
NEW QUESTION # 19
A tunnel mode SSID is configured on a FortiGate wireless controller.
Which task must be completed before the SSID can be used?
- A. The new network must be manually assigned to a FortiAP profile.
- B. The wireless network interface must be assigned a Layer 3 address.
- C. Security Fabric and HTTPS must be enabled on the wireless network interface.
- D. The wireless network to Internet firewall policy must be configured.
Answer: B
Explanation:
Explanation
The wireless network interface must be assigned a Layer 3 address because it acts as the gateway for the tunnel mode SSID traffic. The FortiGate wireless controller uses this interface to communicate with the FortiAPs and the wireless clients. Without a valid IP address, the tunnel mode SSID cannot function properly.
References: Secure Wireless LAN Course Description, page 5; [FortiOS 6.4.0 Handbook - Wireless Controller], page 24.
NEW QUESTION # 20
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Increase the transmission power of the AP radios
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Install another AP in the reception area to improve available bandwidth
- D. Enable frequency handoff on the AP to band steer clients
Answer: A
NEW QUESTION # 21
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- B. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- C. Indicates channels that cannot be used because of regulatory channel restrictions
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: B
NEW QUESTION # 22
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. Two wireless APs must be sending data
- B. Wireless network security must be set to open
- C. SQL services must be running
- D. DTLS encryption on wireless traffic must be turned off
Answer: A
Explanation:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
NEW QUESTION # 23
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create a custom AP profile
- B. Preauthorize APs
- C. Create wireless LAN specific policies
- D. Set the wireless controller country setting
Answer: D
NEW QUESTION # 24
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 83 Tunnel-Preference
- B. 65 Tunnel-Medium-Type
- C. 81 Tunnel-Private-Group-ID
- D. 64 Tunnel-Type
- E. 58 Egress-VLAN-Name
Answer: B,C,D
Explanation:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION # 25
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. Open, with radius MAC filtering
- B. WPA2 Personal and radius MAC filtering
- C. WPA2 Enterprise
- D. WPA3 Enterprise
Answer: B
NEW QUESTION # 26
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. For both interfaces in the wtp-profile, configure vap-all to be manual
- B. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- C. Increase the transmission power of the AP radio interfaces
- D. Disable intra-vap-privacy for the Authors vap-wireless network
Answer: A,B
Explanation:
Explanation
The configuration changes that will resolve the issue are to configure set vaps to be "Authors" for both interfaces in the wtp-profile, and to configure vap-all to be manual for both interfaces in the wtp-profile. This is because the current configuration does not assign any VAPs to the AP interfaces, which means that no wireless networks are broadcasted by the APs. The vap-all setting determines whether all VAPs are assigned to an interface or not, and the vaps setting specifies which VAPs are assigned to an interface. By setting vap-all to manual and vaps to "Authors", the APs will only broadcast the Authors wireless network on both interfaces. Disabling intra-vap-privacy for the Authors vap-wireless network will not help, as it only affects the communication between clients on the same SSID, not their connection to the AP. Increasing the transmission power of the AP radio interfaces will not help, as it only affects the signal strength and coverage of the APs, not their broadcasting of wireless networks. References: wireless-controller vap | FortiGate / FortiOS 6.4.0, Technical Note: How to configure intra-SSID privacy
NEW QUESTION # 27
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Installation phase
- B. Hardware selection phase
- C. Project information phase
- D. Site survey phase
Answer: C,D
NEW QUESTION # 28
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. FortiSwitch
- B. FortiGate
- C. FortiAP Cloud
- D. AP Manager
Answer: B,C
Explanation:
Explanation
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION # 29
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 83 Tunnel-Preference
- B. 65 Tunnel-Medium-Type
- C. 81 Tunnel-Private-Group-ID
- D. 64 Tunnel-Type
- E. 58 Egress-VLAN-Name
Answer: B,C,D
Explanation:
Explanation
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION # 30
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the diag wireless-controller wlac -d sta command
- B. On the controller CLI, using the WiFi Client monitor
- C. On the AP CLI, using the cw_diag -d sta command
- D. On the AP CLI, using the cw_diag ksta command
Answer: A
NEW QUESTION # 31
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
- B. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
- C. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- D. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
Answer: B
Explanation:
Explanation
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
NEW QUESTION # 32
Which factor is the best indicator of wireless client connection quality?
- A. The receive signal strength (RSS) of the client at the AP
- B. Upstream link rate, the connection rate for the client to the AP
- C. The channel utilization of the channel the client is using
- D. Downstream link rate, the connection rate for the AP to the client
Answer: B
NEW QUESTION # 33
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Multicast
- B. DHCP
- C. Broadcast
- D. Static
Answer: D
Explanation:
Explanation
According to the web search results, the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration is static. This means that the FortiAP sends discovery requests to a preconfigured IP address that the controller owns. This is useful if the FortiAP and the controller are not in the same subnet and other discovery methods will not work. The other discovery methods are used in sequence if the static method fails or is not configured. References: Advanced WiFi controller discovery | FortiAP / FortiWiFi 7.4.0
NEW QUESTION # 34
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?
- A. Enable Radio resource provisioning on the relevant AP profiles.
- B. Ensure that all allowed channels are enabled for the AP radios.
- C. Enable Monitor channel utilization on the relevant AP profiles.
- D. Enable Locate WiFi clients when not connected in the relevant AP profiles.
Answer: A
Explanation:
Explanation
The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.
NEW QUESTION # 35
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. Data channels
- B. Control channels
- C. Security channels
- D. FortLink channels
Answer: A,B
Explanation:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION # 36
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength weaker than -68 dB are cut out of the map
- B. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- C. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- D. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
Answer: D
NEW QUESTION # 37
......
Passing the Fortinet NSE6_FWF-6.4 exam is a great achievement that can open up many opportunities in the field of wireless networking and security. Whether you are looking to advance your career or simply increase your knowledge and skills, NSE6_FWF-6.4 exam is an excellent way to demonstrate your expertise in wireless networking and security. With the right preparation and study, anyone can pass the Fortinet NSE6_FWF-6.4 exam and become a certified Fortinet Network Security Expert.
Passing Key To Getting NSE6_FWF-6.4 Certified Exam Engine PDF: https://www.suretorrent.com/NSE6_FWF-6.4-exam-guide-torrent.html
Get Top-Rated Fortinet NSE6_FWF-6.4 Exam Dumps Now: https://drive.google.com/open?id=1qZUZuhpAVnbjypMKhNzyhZki6-FjFDEK