[Oct-2021] Feel Fortinet NSE6_FWF-6.4 Dumps PDF Will likely be The best Option
NSE6_FWF-6.4 exam torrent Fortinet study guide
NEW QUESTION 15
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: B,D
NEW QUESTION 16
What type of design model does FortiPlanner use in wireless design project?
- A. Analytical model
- B. Architectural model
- C. Predictive model
- D. Integration model
Answer: B
Explanation:
FortiPlanner will look familiar to anyone who has used architectural or home design software.
NEW QUESTION 17
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Increase the transmission power of the AP radios
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Enable frequency handoff on the AP to band steer clients
- D. Install another AP in the reception area to improve available bandwidth
Answer: A
NEW QUESTION 18
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- B. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- C. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- D. Areas with the signal strength weaker than -68 dB are cut out of the map
Answer: B
NEW QUESTION 19
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?
- A. SSH
- B. HTTPS
- C. Security Fabric
- D. FortiTelemetry
Answer: C
NEW QUESTION 20
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Social networks authentication
- B. Short message service authentication
- C. Hardware security token authentication
- D. Software security token authentication
Answer: A,C
Explanation:
This information along with the social network authentication logins with Facebook, Google, Instagram, LinkedIn, or FortiPresence using your WiFi.
Captive Portal configurations for social media logins and internet access. You can add and manage sites using the integrated Google maps and manoeuvre your hardware infrastructure easily.
NEW QUESTION 21
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user online activity
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user movements
Answer: C
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION 22
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the diag wireless-controller wlac -d sta command
- B. On the AP CLI, using the cw_diag ksta command
- C. On the AP CLI, using the cw_diag -d sta command
- D. On the controller CLI, using the WiFi Client monitor
Answer: A
NEW QUESTION 23
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 83 Tunnel-Preference
- B. 65 Tunnel-Medium-Type
- C. 81 Tunnel-Private-Group-ID
- D. 64 Tunnel-Type
- E. 58 Egress-VLAN-Name
Answer: B,C,D
Explanation:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION 24
Which factor is the best indicator of wireless client connection quality?
- A. The channel utilization of the channel the client is using
- B. Downstream link rate, the connection rate for the AP to the client
- C. The receive signal strength (RSS) of the client at the AP
- D. Upstream link rate, the connection rate for the client to the AP
Answer: C
Explanation:
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
NEW QUESTION 25
Which two statements about background rogue scanning are correct? (Choose two.)
- A. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. Background rogue scanning requires DARRP to be enabled on the AP instance
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
Answer: A,D
Explanation:
To enable rogue AP scanning
NEW QUESTION 26
Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)
- A. Comparing current data with historical records
- B. Reporting potential threats by guests on site
- C. Predicting the number of guest users visiting on-site
- D. Gathering details about on site visitors
Answer: C,D
NEW QUESTION 27
......
Use Valid New NSE6_FWF-6.4 Test Notes & NSE6_FWF-6.4 Valid Exam Guide: https://www.suretorrent.com/NSE6_FWF-6.4-exam-guide-torrent.html
NSE6_FWF-6.4 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://drive.google.com/open?id=1N_mm2Us9sFxP5OpumJ9CVZwtEjHVduau