Latest Success Metrics For Actual 500-220 Exam 2024 Realistic Dumps
Updated 500-220 Dumps Questions For Cisco Exam
Cisco 500-220 (Engineering Cisco Meraki Solutions) Exam is a certification exam that is designed to test the knowledge and skills of IT professionals in deploying and managing Cisco's Meraki solutions. It is a challenging exam that requires a strong understanding of Meraki solutions and their deployment. Candidates who pass the exam will be recognized as experts in Meraki solutions and will be able to demonstrate their skills to employers and clients.
NEW QUESTION # 38
How is high-availability supported for Cisco Meraki devices?
- A. Only the MX Security Appliances that use VRRP support high availability.
- B. An active/active high-availability pair is recommended for MX Security Appliances.
- C. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
- D. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.
Answer: A
Explanation:
Reference:
_High_Availability_Pair
NEW QUESTION # 39
Refer to the exhibit.
Which IDS/IPS mode is the MX Security Appliance configured for?
- A. quarantine
- B. detection
- C. prevention
- D. blocking
Answer: C
NEW QUESTION # 40
Which order is accurate for a firmware upgrade on MX appliances in a high-availability configuration?
- A. starts on the secondary MX appliance and then occurs on the primary MX appliance
- B. starts on both MX appliances at the same time and then reboots both appliances after traffic on the primary MX appliance ceases
- C. starts on the primary MX appliance and then occurs on the secondary MX appliance
- D. starts on both MX appliances at the same time and then immediately reboots both appliances
Answer: C
NEW QUESTION # 41
What are two roles of the network and device tags in a Dashboard? (Choose two.)
- A. Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.
- B. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
- C. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.
- D. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
- E. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
Answer: A,C
Explanation:
Explanation
See Permissions by Network Tag section To simplify the assignment of network-level permissions in an organization with many networks, permissions can be granted to users for a given network tag.
https://documentation.meraki.com/General_Administration/Managing_Dashboard_Access/Managing_Dashboard The Organization > Configure > Manage Tags page allows Administrators to configure a combination of Network and Device specific tags to create Summary Reports filtered for specific devices across multiple networks.
https://documentation.meraki.com/General_Administration/Organizations_and_Networks/Organization_Menu/M
NEW QUESTION # 42
Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?
- A. Wireless > Configure > Firewall & Traffic Shaping
- B. Wireless > Configure > SSIDs
- C. Wireless > Configure > Splash page
- D. Wireless > Configure > Access Control
Answer: D
NEW QUESTION # 43
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
Answer:
Explanation:
NEW QUESTION # 44
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. New clients can connect.
- B. Currently associated clients are disconnected.
- C. New clients cannot connect.
- D. Currently associated clients are affected by restrictive traffic shaping rules.
- E. Currently associated clients stay connected.
Answer: B,C
NEW QUESTION # 45
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. PUT
- B. PATCH
- C. GET
- D. ADD
- E. POST
- F. SET
Answer: A,C,E
Explanation:
Explanation
Verbs in the API follow the usual REST conventions:
GET returns the value of a resource or a list of resources, depending on whether an identifier is specified.
POST adds a new resource
PUT updates a resource
DELETE removes a resource
https://documentation.meraki.com/General_Administration/Other_Topics/Cisco_Meraki_Dashboard_API
NEW QUESTION # 46
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
- A. Bridge mode
- B. 802.11r
- C. Dual band operating with Band Steering
- D. Content filtering
Answer: C
NEW QUESTION # 47
How does a Meraki device behave if cloud connectivity is temporarily lost?
- A. The offline device continues to run with its last known configuration until cloud connectivity is restored.
- B. The offline device tries to form a connection with a local backup sever.
- C. The offline device reboots every 5 minutes until connection is restored.
- D. The offline device stops passing traffic.
Answer: A
Explanation:
Explanation
What happens if a network loses connectivity to the Meraki cloud?
Because of Meraki's out of band architecture, most end users are not affected if Meraki wireless APs, switches, or security appliances cannot communicate with Meraki's cloud services (e.g., because of a temporary WAN failure):
* Users can access the local network (printers, file shares, etc.)
* If WAN connectivity is available, users can access the Internet
* Network policies (firewall rules, QoS, etc.) continue to be enforced
* Users can authenticate via 802.1X/RADIUS and can roam wirelessly between access points
* Users can initiate and renew DHCP leases
* Established VPN tunnels continue to operate
* Local configuration tools are available (e.g., device IP configuration
https://meraki.cisco.com/lib/pdf/meraki_datasheet_cloud_management.pdf
NEW QUESTION # 48
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
- A. zone exclusion
- B. area or interest
- C. restricted mode
- D. sensor crop
- E. privacy window
Answer: E
Explanation:
Explanation
https://documentation.meraki.com/MV/Initial_Configuration/Privacy_Windows
NEW QUESTION # 49
Which Cisco Meraki best practice method preserves complete historical network event logs?
- A. Configuring Dashboard logging to preserve only certain event types.
- B. Configuring the preserved event number to maximize logging.
- C. Configuring a syslog server for the network.
- D. Configuring the preserved event period to unlimited.
Answer: C
Explanation:
Explanation
Configuring a syslog server for the network is the Cisco Meraki best practice method to preserve complete historical network event logs. A syslog server can be configured to store messages for reporting purposes from MX Security Appliances, MR Access Points, and MS switches1. The syslog server can collect various types of events, such as VPN connectivity, uplink connectivity, DHCP leases, firewall rules, IDS alerts, and security events2. The syslog server can also help with troubleshooting and monitoring the network performance and security.
NEW QUESTION # 50
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. highest VLAN ID that is configured and set to YES to use VPN
- B. lowest VLAN ID that is configured and set to YES to use VPN
- C. highest VLAN ID that is configured and set to NO to use VPN
- D. lowest VLAN ID configured and set to NO to use VPN
Answer: A
Explanation:
Reference:
Using_the_Ping_Live_Tool
NEW QUESTION # 51
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- B. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- C. WebEx traffic will prefer WAN 2 as long as it is up.
- D. WebEx traffic will be load-balanced between both active WAN links.
Answer: B
Explanation:
Explanation
Assuming this MX has established a full tunnel with its VPN peer, the MX will route the WebEx traffic based on the SD-WAN policy configured in the exhibit. The SD-WAN policy has two performance classes: Conf and Default. The Conf performance class matches the traffic with destination port 9000, which is used by WebEx for VoIP and video RTP3. The Conf performance class has a preferred uplink of WAN 2 and a failover uplink of WAN 1. It also has thresholds for latency, jitter, and loss that determine when to switch from the preferred uplink to the failover uplink. Therefore, the WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the Conf performance class. If WAN 2 exceeds the thresholds or goes down, the WebEx traffic will switch to WAN 1 as the failover uplink.
NEW QUESTION # 52
What is the best practice Systems Manager enrollment method when deploying corporate-owned iOS devices?
- A. DEP
- B. Sentry enrollment
- C. manual
- D. Apple Configurator
Answer: D
NEW QUESTION # 53
How is high-availability supported for Cisco Meraki devices?
- A. An active/active high-availability pair is recommended for MX Security Appliances.
- B. Only the MX Security Appliances that use VRRP support high availability.
- C. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
- D. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.
Answer: C
Explanation:
Explanation
https://documentation.meraki.com/MS/Layer_3_Switching/MS_Warm_Spare_(VRRP)_Overview
NEW QUESTION # 54
The WAN connection of a Cisco Meraki MX security appliance is congested, and the MX appliance is buffering the traffic from LAN ports going to the WAN ports. High, normal, and low priority queue buffers are all full. Which proportion of the normal traffic is forwarded compared to the other queues?
- A. 2/7 packets
- B. 5/15 packets
- C. 2/10 packets
- D. 4/10 packets
Answer: A
Explanation:
Explanation
https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/SD-WAN_and_Traffic_Shaping
NEW QUESTION # 55
Refer to the exhibit.
What are two outcomes reflected in the Web App Health application? (Choose two.)
- A. Neither network recorded any server-side performance issues.
- B. Users on both networks may be experiencing issues when attempting to reach Google.
- C. Network #2 had better application performance than Network #1.
- D. Network #2 could not load Google because of a local client misconfiguration.
- E. Network #1 could not load Google because of a remote server issue.
Answer: A,E
NEW QUESTION # 56
......
Cisco 500-220 exam covers a broad range of topics, including Meraki architecture, network design, security, and troubleshooting. 500-220 exam is designed to test your knowledge and skills in deploying Meraki solutions and configuring them to meet the needs of your clients. It also tests your ability to troubleshoot common issues that may arise during the deployment process.
Full 500-220 Practice Test and 74 Unique Questions, Get it Now!: https://www.suretorrent.com/500-220-exam-guide-torrent.html
Best Value Available Preparation Guide for 500-220 Exam: https://drive.google.com/open?id=1gGUw28D0HuGn9Bu0ni4kiO-tBF1MifAO