[Nov-2021] 500-220 Pre-Exam Practice Tests | Exam Questions and Answers for Cisco Meraki Solutions Specialist Study Guide
Engineering Cisco Meraki Solutions Certification Sample Questions
NEW QUESTION 31
Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?
- A. Wireless > Configure > Access Control
- B. Wireless > Configure > Firewall & Traffic Shaping
- C. Wireless > Configure > Splash page
- D. Wireless > Configure > SSIDs
Answer: A
NEW QUESTION 32
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)
- A. RADIUS for splash page settings
- B. Captive Portal strength
- C. Simultaneous logins
- D. Controller disconnection behavior
- E. Firewall & traffic shaping
Answer: B,D
NEW QUESTION 33
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
Answer:
Explanation:
NEW QUESTION 34
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
- A. Content filtering
- B. Dual band operating with Band Steering
- C. Bridge mode
- D. 802.11r
Answer: B
NEW QUESTION 35
Refer to the exhibit.
Which IDS/IPS mode is the MX Security Appliance configured for?
- A. detection
- B. prevention
- C. blocking
- D. quarantine
Answer: B
NEW QUESTION 36
Which requirement is needed to implement Fast Lane on Cisco Meraki APs?
- A. adaptive 802.11r disabled
- B. traffic shaping rule tagging traffic with a DSCP value of 46 to Apple.com
- C. wireless profile installed on a Cisco iOS access point
- D. wireless profile installed on an Apple iOS device
Answer: D
Explanation:
Reference:
Wireless_QoS_and_Fast_Lane
NEW QUESTION 37
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?
- A. Create a security policy that enables automatic updates.
- B. Create a profile with automatic update enabled and apply it to iOS devices.
- C. Configure automatic updating of iOS devices in the Meraki installed profile.
- D. No configuration step is necessary; automatic updating is the default behavior.
Answer: A
NEW QUESTION 38
How does a Meraki device behave if cloud connectivity is temporarily lost?
- A. The offline device reboots every 5 minutes until connection is restored.
- B. The offline device stops passing traffic.
- C. The offline device tries to form a connection with a local backup sever.
- D. The offline device continues to run with its last known configuration until cloud connectivity is restored.
Answer: C
NEW QUESTION 39
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?
- A. The device is locked with a passcode.
- B. The device cannot connect to Cisco Meraki servers.
- C. The device cannot connect to Apple servers.
- D. The application requires the most recent iOS version.
Answer: A
NEW QUESTION 40
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.
How many tunnels does each hub need to support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 41
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. New clients can connect.
- B. Currently associated clients are affected by restrictive traffic shaping rules.
- C. Currently associated clients stay connected.
- D. Currently associated clients are disconnected.
- E. New clients cannot connect.
Answer: D,E
NEW QUESTION 42
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- B. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
- C. For IPsec tunneling, peers use UDP ports 500 and 4500.
- D. Peers contact the VPN registry at TCP port 9350.
- E. Peers contact the VPN registry at UDP port 9350.
Answer: B,E
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION 43
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All network devices stop functioning in 30 days.
- B. All APs immediately stop functioning.
- C. One AP Immediately stops functioning.
- D. All APs stop functioning in 30 days.
Answer: A
NEW QUESTION 44
For which two reasons can an organization become "Out of License"? (Choose two.)
- A. licenses that are in the wrong network
- B. MR licenses that do not match the MR models in the organization
- C. licenses that do not match the serial numbers in the organization
- D. more hardware devices than device licenses
- E. expired device license
Answer: D,E
NEW QUESTION 45
Refer to the exhibit.
What is the minimal Cisco Meraki Insight licensing requirement?
- A. A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network B.
- B. A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network B.
- C. A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network B.
- D. Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.
- E. Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network B.
Answer: D
NEW QUESTION 46
......
Cisco Exam Practice Test To Gain Brilliante Result: https://www.suretorrent.com/500-220-exam-guide-torrent.html
Tested Material Used To 500-220: https://drive.google.com/open?id=1xzk-mnFD_1XNjncyECKdBFqyzFzf6rrk